Broadband Amplifier Spans 18 To 26.5 GHz

Oct. 5, 2009
A self-cooled, 3U rack-mount high-power amplifier dubbed the model AMF-8B-18002650-70-37P-PS covers 18 to 26.5 GHz while delivering a minimum of 5 W of power. The PA offers nominal small-signal gain of 50 dB while saturated output power is ...

A self-cooled, 3U rack-mount high-power amplifier dubbed the model AMF-8B-18002650-70-37P-PS covers 18 to 26.5 GHz while delivering a minimum of 5 W of power. The PA offers nominal small-signal gain of 50 dB while saturated output power is typically +38 1 dBm. The device's input/output port VSWRs are typically 2.0:1 or less. The amplifier requires 90 to 240 VAC at 40 to 400 Hz. It draws less than 80 W with a separate RF power switch. The PA includes over-temperature protection in addition to full internal regulation.

MITEQ, Inc., 100 Davids Dr., Hauppauge, NY 11788; (631) 436-7400, FAX: (631) 436-7430, Internet: www.miteq.com.

See Associated Figure

Page Title

A self-cooled, 3U rack-mount high-power amplifier dubbed the model AMF-8B-18002650-70-37P-PS covers 18 to 26.5 GHz while delivering a minimum of 5 W of power. The PA offers nominal small-signal gain of 50 dB while saturated output power is typically +38 1 dBm. The device's input/output port VSWRs are typically 2.0:1 or less. The amplifier requires 90 to 240 VAC at 40 to 400 Hz. It draws less than 80 W with a separate RF power switch. The PA includes over-temperature protection in addition to full internal regulation.

MITEQ, Inc., 100 Davids Dr., Hauppauge, NY 11788; (631) 436-7400, FAX: (631) 436-7430, Internet: www.miteq.com.

See Associated Figure

Page Title

A self-cooled, 3U rack-mount high-power amplifier dubbed the model AMF-8B-18002650-70-37P-PS covers 18 to 26.5 GHz while delivering a minimum of 5 W of power. The PA offers nominal small-signal gain of 50 dB while saturated output power is typically +38 1 dBm. The device's input/output port VSWRs are typically 2.0:1 or less. The amplifier requires 90 to 240 VAC at 40 to 400 Hz. It draws less than 80 W with a separate RF power switch. The PA includes over-temperature protection in addition to full internal regulation.

MITEQ, Inc., 100 Davids Dr., Hauppauge, NY 11788; (631) 436-7400, FAX: (631) 436-7430, Internet: www.miteq.com.

See Associated Figure

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.