Band-Reject Filters Can Be Tuned Over 7.5-Percent Range

Oct. 5, 2009
A new family of bandstop and cavity filters allows designers to adjust center-frequency values. These filters are tunable over a 7.5-percent center-frequency range with minimal change in bandwidth. Center frequencies range from 1000 to 6000 MHz with ...

A new family of bandstop and cavity filters allows designers to adjust center-frequency values. These filters are tunable over a 7.5-percent center-frequency range with minimal change in bandwidth. Center frequencies range from 1000 to 6000 MHz with 3-dB bandwidths of 0.5 to 12 percent of the center frequency. With a 2-W power rating, the 50-Ω filters offer a VSWR of 1.5:1. The filters have two to nine sections with respective 3-dB/40-dB bandwidth ratios ranging from 30 to 2.3. The MIL-E-5400 class 1A filters operate from -55 to +85C. They come equipped with SMA female connectors.

RLC Electronics, Inc., 83 Radio Circle, Mount Kisco, NY 10549; (914) 241-1334, FAX: (914) 241-1753, Internet: www.rlcelectronics.com.

See Associated Figure

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.