2.4-GHz Switch Selects Wireless Functions

Oct. 14, 2010
BOASTING A TRIPLE-THROW DESIGN, the new 2413 switches can support Wi-Fi and Bluetooth devices from 0.5 to 3.0 GHzeven in the same module. The RF switches also can serve ZigBee/IEEE 802.15.4 products. The single-pole triple-throw (SP3T) RF antenna ...

BOASTING A TRIPLE-THROW DESIGN, the new 2413 switches can support Wi-Fi and Bluetooth devices from 0.5 to 3.0 GHzeven in the same module. The RF switches also can serve ZigBee/IEEE 802.15.4 products. The single-pole triple-throw (SP3T) RF antenna switches, dubbed the uPG2413T6M and the uPG2413T6Z, exhibit 0.35 dB of insertion loss at 1 GHz and 0.50 dB at 2.5 GHz. They offer 26 and 18 dB isolation, respectively, at 1 and 2.5 GHz. The switches handle +28 dBm power at 0.1-dB compression and +31-dBm power at 1-dB compression. P&A: available now; $0.49 for the T6M and $0.39 for the T6Z in 100,000Q.

California Eastern Laboratories, 4590 Patrick Henry Dr., Santa Clara, CA 95054; (408) 919-2500, FAX: (408) 988-0279, Internet: www.cel.com.

See Assoicated Figure

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.