Mwrf 1944 Crystek 0
Mwrf 1944 Crystek 0
Mwrf 1944 Crystek 0
Mwrf 1944 Crystek 0
Mwrf 1944 Crystek 0

VCO Cuts Phase Noise at 3650 MHz

Aug. 11, 2015
A low-noise VCO tunes to 3650 MHz and delivers +7 dBm output power in a compact, surface-mount package.

Model CVCO55CC-3650-3650 is a voltage-controlled oscillator (VCO) designed to operate at 3650 MHz with a control voltage range of +0.5 to +4.5 VDC. It delivers +7 dBm typical output power at that frequency with typical phase noise of -108 dBc/Hz offset 10 kHz from the carrier. The VCO, which is suitable for use in digital radios and satellite-communications (satcom) systems, is supplied in an industry-standard 0.5 × 0.5 in. surface-mount package. Current consumption is typically 35 mA at a supply voltage of +8 VDC. Second-harmonic suppression is typically -15 dBc. Pulling and pushing are 1.0 MHz and 0.2 MHz/V, respectively.

Crystek Corp., 12730 Commonwealth Dr., Fort Myers, FL 33913; (800) 237-3061, (238) 561-3311, FAX: (239) 561-1025

Sponsored Recommendations

Frequency Modulation Fundamentals

March 14, 2024
The development of crystal-clear FM communications was an innovation of genius and toil. Utilized today in applications such as radar, seismology, telemetry and two-way radios...

44 GHz Programmable Signal Generator

March 14, 2024
The Mini-Circuits SSG-44G-RC is a 0.1 to 44 GHz signal source with an RF output range of -40 to +17 dBm with fine resolution. This model supports CW and pulsed (? 0.5 ?s) outputs...

Webinar: Introduction to OTA Measurement for mmWave and Sub-THz

Feb. 19, 2024
Join Jeanmarc Laurent, a leading expert from MilliBox, for an exclusive live webinar showcasing a complete Over-the-Air (OTA) testing system setup. In this immersive session, ...

Using a CMT VNA with Socket Server

Feb. 19, 2024
This application note describes use of a software application CMT Socket Server which is distributed and supported by Aphena Ltd. Please email [email protected] regarding purchase...