Mwrf 862 Crystek 0

Precision Source Supplies 2000 MHz

June 10, 2013
A precision frequency source provides +5 dBm at 2 GHz with low phase noise and harmonic content.

Model CRFS75-2000 from Crystek Corp. is a precision frequency source that provides +5-dBm typical output power at 2000 MHz with ±150 ppm accuracy. It exhibits second harmonics of typically -20 dBc with single-sideband (SSB) phase noise of typically -133 dBc/Hz offset 10 kHz from the carrier and typically -158 dBc/Hz offset 1 MHz from the carrier. The oscillator draws typical input current of 30 mA from a supply at +4.75 to +5.25 VDC across operating temperatures from -40 to +85°C. The source, which is supplied in a surface-mount housing measuring 0.75 x 0.75 x 0.250 in. (19.05 x 19.05 x 6.35 mm), meets the applicable requirements of MIL-STD-883 for  shock, vibration, moisture resistance, and thermal shock.

Crystek Corp., 12730 Commonwealth Dr., Fort Meyers, FL 33913; (800) 237-3061, (239) 561-3311, FAX: (239) 561-1025.

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.