Mwrf 1972 Pmi 0

DLVA Grabs 0.5 to 2.0 GHz

June 2, 2015
This rugged DLVA provides a wide logging range from 500 MHz to 2 GHz.

Model GMDA-D1007 is an extended-range detector-log-video amplifier (DLVA) with frequency range of 0.5 to 2.0 GHz. It features a signal logging range of -60 to +7 dBm with tangential signal sensitivity (TSS) of -65 dBm. It delivers logging linearity of ±1.5 dB at room temperature and ±2.0 dB over the full operating temperature range of -54 to +85°C. The amplifier can handle input power to +23 dBm CW and provides +2.5 VDC maximum output voltage. The DLVA operates with video load impedance of typically 75 Ω and draws 300 mA at +12 to +15.5 VDC. Built to MIL-STD-202F, the DLVA achieves video rise time of 30 ns and recovery time of 1 μs, with maximum throughput time of 30 ns.

Planar Monolithics Industries (PMI), 7311-F Grove Rd., Frederick, MD 21704; (301) 662-5019, FAX: (301) 662-1731

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.