Mwrf 1970 Crystek 0

Coaxial Resonator Oscillator Cuts Noise at 3.5 GHz

June 2, 2015
This compact coaxial resonator oscillator features low phase at a carrier frequency of 3500 MHz.

Model CVCO55CCQ-3500-3500 is a coaxial resonator oscillator designed for use at 3500 MHz. It operates on tuning voltages of +0.3 to +4.9 VDC with tuning sensitivity of 8 MHz/V, delivering +6 dBm output power that remains flat within ±2 dB. The oscillator features typical phase noise of -115 dBc/Hz offset 10 kHz from the carrier and -135 dBc/Hz offset 100 kHz from the carrier. Second harmonics are no worse than –8 dBc. The oscillator draws 27 mA current from a supply voltage of +5 ±0.25 VDC and is built for an operating temperature range of -40 to +85°C. It is supplied in a surface-mount housing measuring 0.50 × 0.50 in. (12.70 × 12.70 mm).  

Crystek Corp., 12730 Commonwealth Dr., Fort Meyers, FL 33913; (239) 561-3311, (800) 237-3061, FAX: (239) 561-1025

Sponsored Recommendations

UHF to mmWave Cavity Filter Solutions

April 12, 2024
Cavity filters achieve much higher Q, steeper rejection skirts, and higher power handling than other filter technologies, such as ceramic resonator filters, and are utilized where...

Wideband MMIC Variable Gain Amplifier

April 12, 2024
The PVGA-273+ low noise, variable gain MMIC amplifier features an NF of 2.6 dB, 13.9 dB gain, +15 dBm P1dB, and +29 dBm OIP3. This VGA affords a gain control range of 30 dB with...

Fast-Switching GaAs Switches Are a High-Performance, Low-Cost Alternative to SOI

April 12, 2024
While many MMIC switch designs have gravitated toward Silicon-on-Insulator (SOI) technology due to its ability to achieve fast switching, high power handling and wide bandwidths...

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.